5 Ton Single Girder Gantry Crane for Sale Netherlands | Gantry Crane Case

Netherlands Crane Customer Introduction

The customer is a food factory in the Netherlands that produces and distributes various kinds of snacks, such as chips, nuts, popcorn, and candy. The factory has a large warehouse where it stores raw materials and finished products. The warehouse has a high ceiling and a wide floor area, which requires efficient and flexible material handling equipment.

Why Does the Customer Buy Gantry Crane?

A gantry crane is a type of crane that consists of a horizontal beam supported by two or more legs that run on rails or wheels on the ground. The beam can have one or more hoists that can lift and move loads along the beam. A single girder gantry crane has only one beam, which makes it lighter and cheaper than a double girder gantry crane. A single girder gantry crane is suitable for light to medium duty applications, such as workshops, warehouses, factories, ports, and construction sites.

The customer decided to buy a gantry crane after evaluating different options for lifting and moving heavy loads in the warehouse. The customer needed a crane that could cover a large working area, lift up to 5 tons of weight, and operate smoothly and safely. The customer also wanted a crane that was easy to install, maintain, and operate. After comparing different types of cranes, such as overhead cranes, jib cranes, the customer chose a single girder gantry crane from our company.

Parameter of the gantry crane for sale：

The crane that the customer purchased is a 5 ton single girder gantry crane with a span of 18 meters and a lifting height of 6 meters. The crane has an electric hoist as the lifting mechanism, which can move along the main beam and lift or lower the load with a speed of 8 m/min. The main beam is supported by two legs that run on rails on the ground. The legs are equipped with wheels and motors that can drive the crane along the rails with a speed of 20 m/min. The crane can be controlled by a pendant or a remote controller. 

Advantages of Single Girder Gantry Crane

Transportation and Feedback of the Netherlands Crane

The 5 ton single girder gantry crane was shipped to the customer by sea in several parts, such as the main beam, the legs, the hoist, and the electric components. The customer hired a local contractor to install and test the crane according to our instructions. The installation process took about two days. After the installation was completed, we provided online training and guidance to the customer on how to use and operate the crane. The customer was very satisfied with our service and support.

The customer has been using the 5 ton single girder gantry crane for about six months now. The customer reported that the crane works well and meets their expectations. The customer said that the crane has improved their productivity and efficiency in material handling. The customer also praised our quality and service. The customer said that they would recommend our company and products to their friends and partners.

Guidelines and Precautions for Gantry Crane

1. Before using the crane, check if all parts are in good condition and if there are any loose or damaged parts.
2. Do not overload or over-speed the crane or hoist. Follow the rated capacity and speed of the crane.
3. Do not lift or move people or flammable or explosive materials with the crane.
4. Do not operate the crane under bad weather conditions, such as strong wind, rain, snow, or lightning.
5. Keep a safe distance from the load and avoid standing under or near it.
6. Use clear signals or commands when operating the crane with another person.
7. Stop the crane immediately if there is any abnormal noise or vibration or if there is any malfunction or emergency.

Single Girder Gantry Crane Maintenance

1. Cleaning and lubricating the crane parts, such as the wheels, rails, bearings, gears, chains, and ropes.
2. Checking and tightening the bolts, nuts, screws, and other fasteners.
3. Replacing the worn or damaged parts, such as the brakes, hooks, wires, and switches.
4. Testing and adjusting the electrical components, such as the motors, controllers, sensors, and relays.
5. Recording and reporting the maintenance and inspection results and any problems or faults found.

Why Custom a Crane Solution?

At Yuantai, we know that there is no "one size fits all" in the lifting field. Universal cranes are suitable for general factories, warehouses, etc. Besides, different applications have different needs for cranes. For example, steel industries often lift steel plates, so need electromagnetic cranes. Ports and docks often need to load ore, gravel, and other bulk goods, so need to grab bucket cranes. Chemical dangerous places often need to carry flammable and explosive materials, so need explosion proof cranes.

So, we provide customized cranes according to the special needs of our customers. Custom crane solutions offer many benefits in a variety of applications：

Hoist

Overhead Crane

Gantry Crane

Jib Crane

Get Your Free Quote

I'm happy to help you with a crane solution and pricing. Please provide me with the following crane specifications:

1. What type of overhead cranes do you need? (i.e., overhead crane, gantry crane, etc.)
2. What lifting capacity do you need for your overhead crane?
3. What span of crane do you need? 
4. What lifting height of overhead cranes do you need? 
5. What material will the crane lift? (i.e., steel, concrete, etc.)
6. Will the crane be used indoors or outdoors?
7. Any special requirements for the crane? (i.e., explosion-proof, etc.)

If you have any crane needs, please contact us online or email us at cherry@ytcrane.com. WhatsApp/WeChat：+86 15093126500 . Our crane engineers will give you a suitable crane solution and a specific crane price within 24 hours.